Our Products
Comprehensive range of high-quality power line hardware and accessories for transmission, distribution, and telecommunication networks.
CGH Aluminum Suspension Clamps
Used for supporting aluminum conductors in overhead power lines. Corrosion-resistant with high tensile strength.
Material: Aluminum Alloy | Standards: IEC, ANSI
Bolted Steel Strain Clamps
High-strength clamps for dead-ending ACSR, AAAC, and ACAR conductors. Ideal for tension sections and corner poles.
Material: Galvanized Steel | Load Rating: Up to 60 kN
Polymer Insulators
Hydrophobic silicone rubber insulators with excellent pollution performance. Suitable for coastal and industrial areas.
Voltage Class: 11kV - 33kV | Creepage: 25mm/kV
Aluminum Alloy Cable Lugs
Compression-type lugs for reliable conductor termination. Used in transformers, switchgear, and substations.
Range: 16mm² - 630mm² | Standards: IEC 61238
Stockbridge Vibration Dampers
Protect overhead conductors from aeolian vibration. Prevents fatigue failure at suspension points.
Weight: 0.8kg - 2.5kg | Frequency Range: 5-120Hz
Guy Wire Thimbles
Protect guy wires from abrasion at anchor points. Made from galvanized steel for long service life.
Diameter: 6mm - 16mm | Finish: Hot-Dip Galvanized
Ball Clevis & Socket Eyes
Link fittings for connecting insulators, clamps, and crossarms. Allow angular movement and reduce stress.
Types: Q-U, Q-Y, QN | Material: Forged Steel
Transformer Mounting Brackets
Heavy-duty brackets for pole-mounted transformers. Secure installation with U-bolts and clevises.
Capacity: Up to 500kVA | Compatible: ANSI, IEC Poles
Grounding Rods & Connectors
Copper-bonded steel rods and exothermic welding connectors for effective earthing systems.
Length: 1.2m - 3m | Diameter: 14mm - 17mm
Insulation Piercing Connectors
Tap into insulated conductors without stripping. Used in aerial bundled cable (ABC) networks.
Voltage: 1kV | Conductor Range: 16-150mm²
Preformed Guy Grip
Helical aluminum alloy grips for securing guy wires. No tools required for installation.
Diameter: 3/16" - 3/8" | Breaking Strength: 90% of Wire
Angle Crossarms & Braces
Structural supports for mounting insulators and conductors on utility poles. Galvanized for corrosion resistance.
Length: 1.2m - 2.4m | Material: Mild Steel, Galvanized