Create Value for Our Customers
Leading manufacturer of high-performance polymer additives including PVC Ca Zn Stabilizers, ASA Powder, Acrylic Impact Modifiers, and Processing Aids.
This page is not the official website. Generated by AI, does not constitute any advice. If needed, please click here to visit the corresponding official website.
Leading manufacturer of high-performance polymer additives including PVC Ca Zn Stabilizers, ASA Powder, Acrylic Impact Modifiers, and Processing Aids.
Shandong Jinchangshu New Material Co., Ltd. was established in 2012 and is headquartered in Weifang, Shandong. We are the largest supplier of PVC stabilizers in China, with an annual production capacity of 130,000 tons. Additionally, we produce 30,000 tons per year of processing aids, impact modifiers, and ASA powder.
Our core business focuses on the research, development, production, and sales of plastic stabilizers and polymer additives. We operate two advanced intelligent manufacturing bases, three R&D subsidiaries, one procurement center, and one foreign trade center. Our products are distributed across all provinces in China and exported to Southeast Asia, South America, and the Middle East.
View Our Product Lines
High-performance polymer additives engineered for durability, process efficiency, and superior mechanical properties in PVC and engineering plastics.
High-efficiency calcium-zinc stabilizer ideal for PVC pipe applications. Offers excellent thermal stability, low plate-out, and compliance with environmental regulations.
Designed for PVC profiles and window frames. Provides long-term heat stability, excellent weather resistance, and improved surface finish.
Core-shell acrylic impact modifier (AIM) for outdoor PVC applications such as pipes, fittings, siding, and injection-molded parts. Replaces CPE and MBS with superior performance.
Core-shell emulsion polymerized powder for AS resin injection molding. Enhances impact resistance, strength, and weathering performance without compromising aging resistance.
Core-shell acrylate polymer that improves PVC processability and product appearance. Ensures smooth, glossy surfaces while maintaining PVC's inherent properties.
Emulsion-polymerized core-shell composite compatible with PVC and CPVC. Offers low viscosity, no plate-out, excellent demolding, and heat resistance.
Acrylate processing aid specifically designed for PVC foaming products. Ideal for foamed sheets, ensuring uniform cell structure and surface quality.
High molecular polymer that promotes rapid plasticization and enhances melt flow in non-plasticized PVC. Improves processability without sacrificing mechanical strength.
Advanced acrylate processing aid for PVC foaming applications. Delivers excellent comprehensive performance in foamed profiles and boards.
Specialized stabilizer formulation for Wood-Plastic Composites. Ensures thermal stability during high-temperature processing and long-term outdoor durability.
Designed for Stone-Plastic Composite flooring. Provides excellent fusion, surface gloss, and dimensional stability under rigorous processing conditions.
Engineered for extrusion processes in engineering plastics. Enhances impact strength and UV resistance in exterior building materials and automotive components.
Our products undergo rigorous testing and quality control to ensure consistency, performance, and compliance with international standards.
With three dedicated R&D subsidiaries, we continuously innovate to deliver cutting-edge polymer additive solutions tailored to evolving market needs.
Serving customers across China, Southeast Asia, South America, and the Middle East with reliable supply chains and responsive technical support.
Scientific insights driving innovation in polymer additives
Abstract: ADX-600 is a core-shell acrylic impact modifier resin (AIM) manufactured through emulsion polymerization by our company. The product can serve as the impact modifier for PVC. ADX-600 AIM can replace CPE and MBS according to the comparison of various performance parameters between impact ACR and different PVC impact modifiers. The resultant PVC products demonstrate excellent mechanical properties, processing performance and a higher cost-effective performance.
Keywords: AIM, CPE, MBS, impact modifier, mechanical properties
Abstract: Rigid PVC has disadvantages in processing such as brittleness and poor low temperature toughness. Our product ADX-600 acrylic impact modifier (AIM) can perfectly solve such problems and has better performance and higher cost performance than the commonly used CPE and MBS modifiers. This paper compares ADX-600 AIM with chlorinated polyethylene (CPE) and MBS and analyzes its application in several PVC pipe types.
Keywords: Rigid PVC, Pipe, ADX-600 AIM, CPE, MBS
Abstract: ASA powder JCS-885 is a new type of powder used to improve the mechanical properties of AS resin such as impact resistance, increase the strength of the product and improve the aging performance. It is a product of core-shell emulsion polymerization and has good compatibility with AS resin. It can improve the mechanical properties of the product without reducing the aging performance and is used in injection molding.
Keywords: AS resin, ASA powder, mechanical properties, weathering resistance, injection molding.
By: Zhang Shiqi, Shandong Jinchangshu New Material Technology Co., Ltd., Weifang, Shandong
Abstract: A processing aid to improve the processing performance of PVC—plasticizing aids ADX-1001, is the product obtained after emulsion polymerization, has good compatibility with PVC, can effectively reduce the plasticization time of PVC resin, reduce the processing temperature, make the product soft, applied to injection molding.
Keywords: Plastic additives, plasticizer, plasticization time, processing temperature
By: Sun Xuyang, Shandong Jinchangshu New Material Technology Co., Ltd., Weifang, Shandong
Our latest studies confirm that ADX-600 offers superior impact modification at lower loading levels compared to traditional CPE, reducing costs and improving recyclability.
Published: March 2024Jinchangshu launches new generation Ca Zn stabilizers optimized for Stone-Plastic Composite flooring, meeting strict European environmental standards.
Published: February 2024JCS-885 ASA powder is now being adopted by major automotive suppliers for exterior trim due to its exceptional UV stability and impact resistance.
Published: January 2024Our second intelligent production facility in Weifang is now fully operational, increasing total PVC stabilizer capacity to 130,000 tons annually.
Published: December 2023For inquiries about our products or pricing, please visit our official website to contact our team.
Visit Official WebsiteOffice: Room 1023, #2 Building, Central Business District, Kuiwen District, Weifang, Shandong, China
Notice for Buyers: If you are a buyer, the above information is generated by AI collection and does not constitute any advice. If necessary, please visit the corresponding official website.
For Domain Owners: If you are the domain owner and do not want to be included by fobcompany.info, please contact [email protected] via your corporate email to cancel. We will cancel your inclusion within 3 business days.
如果您是域名所有者 不想被fobcompany.info收录 请用企业邮箱联系[email protected] 取消收录 我们将在3个工作日取消您的收录
Service Request: If you are other domain and want to be included, please contact [email protected]
如果您是其他域名合作 也请联系[email protected]